White medium intensity system FAA L-865 ETL certified

OFI360-WW-240-U
Part Number: 113723UIA
OFI360-WW-240-U

Flashhead

  • 6 led projectors in aluminium and glass
  • 2 white led circuits and a red with infrared circuit inside each projector
  • NVG visible
  • Simple installation with no losing parts when opening the flash-head
  • Normally open or normally close relay in case of lamp default or power supply
  • Communication capabilities (controller, Modbus TCP)
  • Test button for day and night
  • Luminous indicators for quick diagnostic
  • dc surge protection with indicator showing when it has failed included
  • GPS controlled or in back-up activated in case of failure or absence of an external controller or/and photocell

Power supply

  • 'Weather tight' stainless steel 316L power cabinet enclosure
  • Test button with 3 positions: remote (photocell), day and night mode
  • Alarm in compliance with FAA Engineering Brief 98
  • Multi-layer of surge protections
  • Master/slave capability in case of multiple lights synchronisation
  • External photocell P/N 100757-KIT to be ordered separately
Contact Us
The obstaflash system dual color L-865/L-864 or white only L-865 provides a day and night marking solution for all kind of obstacle higher than 61 meters as per FAA. For obstacle below 213 meters the use of white or dual color flashing lights L-865/L-864 during day and twilight time eliminate the need to paint the obstacle with red and white stripes
Select another reference:
OFI360-RW-240-U
OFI360-WW-240-U
Effective light output day time at 0° on site

20 000cd (white)
Effective light output twilight mode at 0° on site

20 000cd (white)
Effective light output night mode at 0° on site

2000cd (white)
Color day/twilight time

white
Color night time

White
Vertical beam spread

3°
Horizontal beam spread

360°
Intensity @ -10% to the ground

3% of max
Flash per minute

40/30 as per FAA
Main voltage

110VAC to 240VAC +/-10% 50/60Hz
Average wattage

55W (day time), 8W (night mode)
IP degree

IP66 per projector
Wiring

Entry of cable by glands nickel plated brass and connection by terminals
Operating temperature
 Tu

-40/+55°C
Size of the light

333mm (height) x 500mm (diameter)
Size of the power supply

400mm (height) x 300mm (width) x 200mm (dept)
Weight

18kg for flashhead, 10kg for power cabinet
Wire cross section

from 1 to 4 mm²
Attachment

6 mounting holes dia.16mm, dia.337mm circle (FAA standard)
Standards compliance

ICAO annex 14 chapter 6, FAA (AC 150/5345-43J), UK MOD, Transport Canada
Certification

FAA (AC 150/5345-43J), ETL certified, DGAC(Fr)
Associated Products
PHOTOCELL-DC-KIT